不同类型的马桶冲水箱

You might be wondering about the different types of toilet flush tanks. These include floatless fill valves, dual cyclone systems, and the tower style. But how do you know which flushing system is right for you? In this article, we‘ll go over the most common types of flushing systems, including the tower-style, floatless fill valve, and siphon. Read on to learn more.

Floatless Fill Valves Toilet Flushing System

Floatless fill valves for toilets are very popular and are often adjustable. This is good news for those with low-profile toilets since other fill valves don‘t fit into this design. You can also use universal fill valves on classic tanks if you have a high-profile toilet. While cheap fill valves might not be ideal for your situation, they are usually very reliable and come with high customer ratings.

Floatless fill valves for toilets send water in two directions. Water flows from the bottom of the fill valve shaft, and the float cup is attached with a long plastic screw. You can raise or lower the water level in the tank by turning the float cup along the valve shaft. After making the adjustment, flush the tank to check its level. When the water level is lower than the desired level, turn the screw again to raise or lower the float cup.

Double Cyclone Toilet Flush System

A double cyclone flush system for
toilet flush tanks
uses a dual mechanism. The dual mechanism creates a centrifugal cyclonic rinsing action inside the toilet bowl. Water is forced through the flapper by a chain and flows from the tank into the bowl. The flapper then returns to its original position when the water level in the tank decreases. A newer dual system allows the water to flow in a two-way pattern, varying the amount of water for liquids and solids.

虹吸式冲水系统的工作原理与浮球阀类似。水通过位于水箱盖上的翻板快速流入。水流经S形弯道进入马桶，产生推力将污物和水推过弯道。当水位达到一定高度时，内置浮球阀关闭水流，并将水送回化粪池。

塔式马桶冲水系统

如果您一直在考虑安装新马桶，您可能正在考虑购买塔式马桶。这种马桶冲水系统采用罐式翻板设计，翻板位于水箱中央，与冲水手柄相连。按下冲水按钮时，塔体完全升起，使水以360度角从水箱流入马桶。这意味着水进入马桶的速度更快，冲力更强。

塔式马桶冲水系统是最常见的马桶冲水系统类型。这种马桶冲水箱样式与传统的翻板马桶类似，但使用独立的阀门。塔体是一个大型圆柱体，带有圆形橡胶垫圈，用于将水保持在水箱中。冲水时，塔体向上抬起，水随后通过溢流管流出。塔式马桶通常有两个不同的阀门——水箱两侧各一个——底部的阀门位于马桶下方。

虹吸式马桶冲水系统

用于马桶水箱的虹吸式冲水系统的工作原理与浮球阀冲水系统类似。虹吸管连接在马桶后部，当水位上升时，虹吸管充满水并开始产生虹吸作用。这一作用迅速冲走马桶中的水和污物，同时将水箱中涌入的水拉入排水管。大部分水在几秒钟内离开马桶。水排空后，马桶水箱中的阀门打开，让更多水进入马桶。

虹吸式冲水阀不易磨损或漏水，使用寿命长。虹吸膜无需每隔几年更换，但如果您愿意，也可以以较低的成本进行更换。虹吸式冲水阀维护需求少，是预算有限用户的理想选择。但请务必仔细阅读说明书。

核心要点

许多马桶制造商在储水箱上添加光泽涂层，以确保冲水顺畅并防止水接触边缘。这使得每次冲水后马桶更干净。大多数马桶每次冲水消耗大量水。此外，冲水马桶清洁效果好，且比标准马桶噪音更小。乐家卫浴致力于通过其高功能性产品系列，确保所有社区都能获得良好的卫生服务。